Bunn Dual TF BrewWISE DBC Guía para resolver problemas descargar pdf (Pagina 14)

TF BrewWISE

Training Manual

Machine Composition

Exterior Overview

Product Outlets and Removable Parts

• User interface (1)

• Display (mounted to the control board) (2)

• Hot water outlet (3)

• Funnel sensing coil (4)

• Funnel (5)

• Server (6)

• Data plate (7)

User Interface

The user interface is a membrane switch adhered to the front of the brewer. The membrane is connected to the con-

trol board by a ribbon cable. The user interface allows the user to select product size and begin a brew cycle.

The machine’s display is mounted to the control board. The display is visible on the front of the machine and provides

information to the user and to the technician.

Accessing the Inside of the Brewer

The majority of service work done to the BrewWISE

brewer will require the service technician to access the inside

of the unit. The brewer has three removable panels to facilitate access- the front panel, the top panel, and the server

base panel. Depending on the repair the technician may have to remove one or all of these panels.

In order to work safely the power should be disconnected prior to removal of any body panel. Once the panels are

removed the power can be reconnected in order to troubleshoot the machine.

Thetoppanelissecuredwith4smallatheadscrews.Totheremovethepanel,removethefourscrews,liftthefront

of the panel up and slide the rear backwards to unhook the panel from the brewer’s body.

Toremovethefrontpanel,rstremovethefunnelsandserversfromthemachine.Thefrontpanelissecuredtothe

brewer with 11 standard screws. Remove the screws and pull the panel straight off of the unit.

Batch Selector Switches

On/Off Switch

Brew Start Switch

Funnel Sensing Coils

ENABLE

ON / OFF

BREW

ENABLE

ON / OFF

BREW

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 30 31

Sin comentarios

Bunn Dual TF BrewWISE DBC Guía para resolver problemas Pagina 14