Bunn Dual TF BrewWISE DBC Guía para resolver problemas descargar pdf (Pagina 17)

Bunn-O-Matic Corporation

Dispensing System

The dispensing system consists of:

• Brew valve

• Bypass valve

• Sprayhead

• Funnel

• Funnel lock solenoids

The dispensing system is what makes the brewer

a coffee brewer. It dispenses the water onto the

ground coffee to create the product.

The BrewWISE

brewer is a gravity dump brewing

system. During the brew cycle the brew and bypass

valvesopenallowingwatertoowfromthetankand

out the product outlets. The control board opens and

closes these valves according to its programming

basedonthespecicrecipecalledfor.Thespray-

head, attached to the dispense solenoid, controls

theoutletowrateofthewater.Thenumberand

sizeoftheholesdeterminestheowrate.

Funnel Lock

The brewer has a funnel lock feature; during the brew cycle and the programmed drip out time the funnel lock sole-

noid will be engaged to prevent the funnel from being removed. It is important to note that the control board supplies

120 DC voltage to the funnel lock solenoid to prevent it from vibrating.

Coffee Holding System

ThermoFresh

servers are vacuum insulated servers that can keep coffee hot and fresh for hours.

TheTFserverhasaremovablestandforexibilityandaspacesavingprole.Thebuilt-indriptray

can also be removed for cleaning purposes as well as the sight gauge and faucet assembly. The

large cup clearance allows for dispensing into cups, decanters and thermal carafes. Like thermal

servers, the TF server must be pre-heated with hot water before it can properly maintain the bever-

age temperature.

Funnel Lock Solenoid

Bypass Valve

Dispense Valve

Sprayhead

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 30 31

Sin comentarios

Bunn Dual TF BrewWISE DBC Guía para resolver problemas Pagina 17